Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ... The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC.The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ...4-8-8-4: 4'-8½" UP: UP engine house, Cheyenne, WY: operational: Alco (Schenectady) #69585, 11/1941: From Pomona, CA. Reacquired by the Union Pacific in July 2013. Restored to operation on May 1, 2019. Converted to burn oil. Temporarily uses the tender of UP 3985. Became the first-ever steam locomotive to be equipped with Positive Train Control ...Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...4-4-4T Cóndor of the Gran Ferrocarril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ...First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ... The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. 4-8-4. Benefits. Better high speed performance. Drawbacks. Wheel slip. A 4-4-4-4 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement ...HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsThe Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.Jun 16, 2020 · O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggest There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn.Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ...Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.The Santa Fe 2900 Class was a series of 30 4-8-4 type steam locomotives built between 1943 and 1944 for Atchison, Topeka and Santa Fe Railroad and pulled freight and passenger trains until retirement in the early to late-1950s. Today, six 2900s survive, with five units on static display and one, No. 2926, has been restored to operating ...This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939.The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927. 4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ...The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".Reading 2101 is a preserved American class "T-1" 4-8-4 "Northern" type steam locomotive constructed in 1945 for use by the Reading Company.Constructed from an earlier "I10SA" 2-8-0 "Consolidation"-type locomotive built in 1923, the 2101 handled heavy coal train traffic for the Reading until being retired from revenue service in 1959. Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ...The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927. Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ...The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were among the few that it bought new.The Santa Fe 2900 Class was a series of 30 4-8-4 type steam locomotives built between 1943 and 1944 for Atchison, Topeka and Santa Fe Railroad and pulled freight and passenger trains until retirement in the early to late-1950s. Today, six 2900s survive, with five units on static display and one, No. 2926, has been restored to operating ...The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927. A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ... Number 4000 was delivered to Omaha at 6PM, September 5, 1941. The 25 Big Boys were built in two groups. The first group of 20 locomotives, called "Class 1", were built starting in 1941. They were numbered 4000-4019. The second group of 5 locomotives, "Class 2", were built in 1944. They were numbered 4020-4024.Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960.October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ...A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ...The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ... Union Pacific 4014 is a steam locomotive owned and operated by the Union Pacific (UP) as part of its heritage fleet. It is a four-cylinder simple articulated 4-8-8-4 "Big Boy" type built in 1941 by the American Locomotive Company (ALCO) at its Schenectady Locomotive Works. It was assigned to haul heavy freight trains in the Wasatch mountain range.The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927. Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.The Chicago, Milwaukee, St. Paul & Pacific Railroad's own motive power department designed a Class S-1, 4-8-4 in 1930. It was built by the Baldwin Locomotive Works and put on the roster as number 9700. It remained the lone Northern on the CMStP&P for the next seven years.The big J3 engine, the sole survivor of a class of 20 built during the desperate days of World War II, is a 1942 product of the American Locomotive Company. The last time someone proposed removing the 4-8-4 from Centennial Park, in 2001, the parks board declined the offer.October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ... Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. Ultra-realistic Union Pacific 4-8-8-4 “Big Boy” steam locomotive. Complete and authentic operating controls and characteristics. Optional configurations for all levels of difficulty from manual operations to auto-fireman and auto-engineer assists, the locomotive is also compatible with Simple Controls. Three locomotive livery variations.O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggestA private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ... Maximum Tractive Effort: 135,375 lbs. Built for the Union Pacific Railroad as one of twenty-five 4-8-8-4 ("Big Boy") steam locomotives ordered by the UP to haul heavy freight across the Continental Divide. Big Boys are famous as among the most powerful steam locomotives ever built. Weighs 1,200,000 pounds.Jun 19, 2006 · Canadian National and its subsidiaries owned North America’s largest fleet of 4-8-4s, including five streamlined versions built in 1936 to haul passenger trains between Montreal and Toronto. James Adams Dual-purpose Northerns followed, with examples going to Canadian National, Grand Trunk Western, Burlington, and Chicago & North Western. A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... 4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green ...It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. China Railways KF. The Class KF (聯盟型, 'Confederation class', re-designated "ㄎㄈ" or "KF") was a 4-8-4 mainline passenger steam locomotive type built in the United Kingdom by the Vulcan Foundry for the railways of China. Between 1935 and 1936, 24 locomotives were built for the Guangzhou – Hankou Railway designated as the 600 series. [1]Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... 05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green ...4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1]4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ...October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ...Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...
The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... . Storejobs wal mart
Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ...The Minneapolis, St. Paul & Sault Sainte Marie Railroad purchased four Class O-20, 4-8-4s in 1938 from the Lima Locomotive Works. They were given road numbers 5000 through 5003 and were assigned to both freight and passenger trains. These locomotives were designed with 75" drivers, 26 x 32 cylinders, a 270 psi boiler pressure, a weight of ...Maximum Tractive Effort: 135,375 lbs. Built for the Union Pacific Railroad as one of twenty-five 4-8-8-4 ("Big Boy") steam locomotives ordered by the UP to haul heavy freight across the Continental Divide. Big Boys are famous as among the most powerful steam locomotives ever built. Weighs 1,200,000 pounds.To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ...4-4-4T Cóndor of the Gran Ferrocarril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ... Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US. Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... Ultra-realistic Union Pacific 4-8-8-4 “Big Boy” steam locomotive. Complete and authentic operating controls and characteristics. Optional configurations for all levels of difficulty from manual operations to auto-fireman and auto-engineer assists, the locomotive is also compatible with Simple Controls. Three locomotive livery variations.Union Pacific 4014 is a steam locomotive owned and operated by the Union Pacific (UP) as part of its heritage fleet. It is a four-cylinder simple articulated 4-8-8-4 "Big Boy" type built in 1941 by the American Locomotive Company (ALCO) at its Schenectady Locomotive Works. It was assigned to haul heavy freight trains in the Wasatch mountain ... The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, 4-8-4. Benefits. Better high speed performance. Drawbacks. Wheel slip. A 4-4-4-4 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement ... This caught the attention of the Western Maryland and in 1947 it took delivery of twelve 4-8-4s from the Baldwin Locomotive Works. Being a "southern" railroad WM rejected the name "Northern" and called its 4-8-4s "Potomacs". These twelve Class J-1 "Potomacs" (road numbers 1401 through 1412) were designed for freight service with 69" drivers, 26 ...S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight.. Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn..